Came here in search of an answer to a problem, but didn't find it? Visit the forum @ LinuxBSDos.com, pick a category and ask a question.

Install Linux Mint 11 on an 8 GB SDHC card

SDHC cards, very small storage cards designed for use in mobile devices, can be used to install your favorite Linux distribution. You can install any distribution on one of these cards in much the same manner that you would to a regular hard disk drive. As far as your computer is concerned, they are just like any other external USB storage device. I bought an 8 GB one for this installation for about 14 USD. That is about twice the price of a similarly-sized flash drive.
sdhc

This article shows how to install Linux Mint 11, the latest release, to an 8 GB SDHC card. If you want to use one of these cards to store sensitive data, I suggest that you use a distribution with support for disk encryption. Fedora 15, Ubuntu Alternate Installer edition, Debian have support for disk encryption, and may be used.

To begin the installation, I inserted the card into the SD port of the computer, the Linux Mint 11 installation DVD into the optical drive, and rebooted the computer, which has a new installation of Linux Mint 11 on it. Installing to an external device requires manual partitioning, so the best choice at this step of the installation process is “Something else.” Forward.
mintSDcard

That brings up the advanced partitioning tool. The installer detects the SDHC card as /dev/sdc, and the available disk space as 7.9 GB. A brand new SDHC card will be detected as a storage device with a FAT32 file system on it. The objective now is to configure three partitions for this installation. The partitions will be mounted at /boot, Swap and /. Normally, I would configure four, but this is a very small device. I do not see a real need to create a separate partition for /home. Select the free space and click Add.
mintSDcard1

The first partition will be mounted at /boot, and the installer will configure it as a primary partition. Which is just fine. The default size allocated to /boot is 500 MB, but since there is not a lot of disk spare to play with, 100 MB should be more than enough. On a new installation, only about 30 MB of the disk space allocated to the boot partition is used. OK.
mintSDcard2

The second partition will be for Swap, disk space that may be used as virtual memory. On a regular hard disk, about 2000 MB is typically allocated to Swap, but because we do not have a lot of disk space to spare on an 8 GB SDHC card, I think 1000 MB should do. The installer will attempt to configure this partition as a logical partition. However, I chose to make this and the next partition primary. OK.
mintSDcard3

Since this is the last partition, allocate the available disk space to it. The file system could be any one of the available journaling file systems. The default is ext4, but you could just as easily select btrfs. The mount point should, of course, be /. OK.
mintSDcard4

All three partitions are configured. The final task at this step is to specify where GRUB, the boot loader, should be installed. Since this installation is on a removable device, the best location is in the Master Boot Record of the device. So, select /dev/sdc from the dropdown menu under the “Device for boot loader installation” section. Click Install Now.
mintSDcard5

The only physical security feature offered by the installer is to encrypt the home folder, and since this is a device that can be lost easily, I think encrypting the home folder is a good choice.
mintSDcard6

After installation, you should have a complete desktop distribution installed on an 8 GB SDHC card. If you attempt to use a distribution with support for disk encryption, let me know if you succeed in encrypting the root and Swap partitions. To boot into the SDHC card, select “USB: Multiple Flash” from the computer’s boot device menu. On many computers, pressing F12 during booting will land you on the boot device menu.

This is a screenshot of the default desktop.
sdhcdesktop

And this is one showing updates being applied.
sdhcdesktop1

This is an output of df -h showing disk usage on the SDHC card. After updates were installed, the USED space on /dev/sdc3 increased to 3.0 GB, with 3.1 GB still available for use.
sdhc

You can have quality articles like this delivered automatically to your Feed Reader or Inbox by subscribing via RSS or email. This website now has a Question and Answer section. Use the commenting system for simple comments, but for more involved assistance, please use the Question & Answers section.

0saves
To have articles like this delivered automatically to your Feed Reader or Inbox, subscribe via RSS or email.
Digital Ocean SSD VPS Cloud Server droplets

Digital Ocean is a VPS/Cloud hosting provider. For just $5 per month, you can get yourself a Cloud server with 512 MB of RAM, 20 GB super-fast SSD, free snapshots, plus backups for a minimal fee. All via a simple graphical interface.

And by signing up with this referral link, you can help support this website.

If you are reading this, your ad could also be occupying this space. Contact us to make it happen.

If commenting on this article is closed, please post your comments at forum.linuxbsdos.com.

5 Comments

  1. gary reardon says:

    can you use linux mint on raspberry pi??

  2. Robert says:

    Hi,

    Journaling can kill almost any flash card.
    That is why I suggest you to use EXT2 or even FAT32.

  3. Timothy says:

    About disk encryption, I haven’t done it on an SDHC card but am positive it should work when used together with LVM i.e using one volume group to house root, swap and home. So you should have one encrypted physical volume, one volume group with three logical volumes and one unencrypted boot partition.

Leave a Comment